Polymer80 PF940v2 80% Standard Size Frame Kit ODG
Polymer80 is pleased to announce the new redesign of our orignal PF940v1 standard size frame, which now has all of the features our customers have come to enjoy from our compact.
Product Overview:ODG
The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
Next Generation Ergonomics and Features
High-Strength Reinforced Polymer Construction
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Drop-In Rear Rail Module (RRM™)
Hardened Pins for LBRS™ and RRM™
Complete Finishing Jig and Drill Bits
PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION.
PRICE: $159.99
T2R Price: $139.99
14 in stock!
Anderson Manufacturing Glock 19 GEN 3 Slide Kit
Extractor with Loaded Chamber Indicator - Material - 174 SS MIM
Extractor Depressor Plunger - Material - 4140 Steel
Extractor Depressor Plunger Spring
Spring Loaded Bearing
Firing Pin (Striker) - Material - 174 SS MIM
Firing Pin Spring
Firing Pin Safety (Material - 4140 Steel (Electroless Ni Coating)) with Spring
Firing Pin Channel Liner
Channel Liner Tool
Firing Pin Spring Cups
Firing Pin Spacer Sleeve
Slide Cover Plate
Guide Rod and Recoil Spring Assembly
FOR GEN 3 GLOCK 19
PRICE: $69.99
T2R Price: $59.99
6 in stock!
(1)
Brownells Glock 19 gen3 RMR sight cut
The Brownells RMR Slide for Glock® 19 Gen3 pistols features a pre-cut slot for easy, secure, low-profile mounting of a Trijicon RMR or Holosun red dot sight. Up front, there are distinctive, cocking serrations that aid in manipulating the slide to check the chamber or clear a jam. And we’ll admit it: the serrations just look cool, too. All RMR Slides also have standard Glock® factory front and rear sight dovetails for "iron" sights. To get proper co-witnessing with the RMR, you will need to also install suppressor-height iron sights.
you can also get the RMR Slide for Glock® 19 Gen3 with a "window" cutout on top between the front serrations that enhances airflow to keep the barrel cooler - ideal for hard-working action competition pistols. Plus, if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) the window lets you show it off a bit!
A Brownells RMR Slide is the ideal upgrade for your factory Glock® 19 Gen3 OR the perfect "top half" for a brand-new custom gun built on a Polymer80 80% frame.
Fits Gen3 Glock® 19 pistols & clones
Built-in Trijicon RMR mounting slot
Also accepts Holosun HE508T, HS507C & HS407C red dot sights
Factory front/rear iron sight cuts, too
Machined from corrosion-resistant 17-4 stainless steel billet
Get it with traditional Solid top or distinctive top Window cutout
Each RMR Slide for Glock® starts life as a billet of 17-4 stainless steel that is machined to Glock® factory specifications inside, so it’ll accept factory or aftermarket barrels and internal parts. Each slide is heat-treated to Rc 41-44 on the Rockwell C scale for added surface hardness and wear resistance.
PRICE: $249.99
T2R Price: $235.99
5 in stock!
-1.jpg "9MM Glock 17 Replacement Barrel Black Nitride Finish")
9MM Glock 17 Replacement Barrel Black Nitride Finish
*The Locking lug under the barrels are different for the Gen 5 Glock pistols, so our barrels will NOT fit the Gen 5 model.
Only Gen 1 through 4.
BCA Glock 17 Factory Replacement Barrel. This barrel is a drop-in fit for the factory Glock 17 barrel.
4150 Black Nitride Barrel
1:16 Twist
9 MM Caliber
PRICE: $128.99
T2R Price: $94.99
3 in stock!
Strike Industries Ark Slide For GLOCK™ G19 GEN3
- The Strike Industries Ark Series Slide was created with optimal accuracy and performance in mind. Machined in the USA from billet 17-4 Stainless Steel using clockwork precision to ensure increased consistency in barrel lockup that results in levels beyond than match-grade accuracy. The Strike Slide weighs significantly less than the factory production model, reducing the recoil momentum, and allows faster and more efficient follow-up placement. Strike Industries proudly designed the Strike Slide with Durability and Function in mind, giving the slide a premium Black Nitride Coating that is protective against scratching and scrapes. improved silhouette with unmatched aggressive styling from the Angled Forward Serrations Points on the front and large surface area in the rear for the most ergonomic pull to the Beveled muzzle creating more grip surface. Combined with Universal optics cut, you are able to mount your favorite optic with ease securely without needing to get your slide cut. Additionally, a removable cover plate is included for your customization preferences. The Four large port relief cuts will highlight any styled barrel you may have and also provides a faster cycle time with its lightweight structure and improved air flow. The Strike Industries Strike Slide is truly an aesthetic and performance upgrade to any G19 GLOCK™ Build.
Product Features:
- Heat Treated to H900, 40-42 HRC
- Four Custom Port Cuts
- Aggressive Serration To Front & Rear Slide Ridges
- Pre-cut universal mount for most proliferated sights in the field
- Lightweight
- Made in USA
Package Includes:
1X Slide
2X Large Post
4X Small Post
2X M3-5mm Screws for Cover Plate
2X M3-6mm Screws for Doctor Sight
2X M3-8mm Screws for MRDS/BURRIS/Vortex Viper
2X M3-10mm Screws for Leopold
2X M3-10.2mm Screws for Trijicon
PRICE: $359.95
T2R Price: $349.95
2 in stock!
Anderson Manufacturing Glock 17 GEN 3 Slide Kit
KIT INCLUDES:
Extractor with Loaded Chamber Indicator - Material - 174 SS MIM
Extractor Depressor Plunger - Material - 4140 Steel
Extractor Depressor Plunger Spring
Spring Loaded Bearing
Firing Pin (Striker) - Material - 174 SS MIM
Firing Pin Spring
Firing Pin Safety (Material - 4140 Steel (Electroless Ni Coating)) with Spring
Firing Pin Channel Liner
Channel Liner Tool
Firing Pin Spring Cups
Firing Pin Spacer Sleeve
Slide Cover Plate
Guide Rod and Recoil Spring Assembly
FOR GEN 3 GLOCK 17
PRICE: $69.99
T2R Price: $59.99
1 in stock!
