Home > AR-15 Parts > AR-15 Parts >

BAD 9MM VERT PDW STOCK SYSTEM BLACK

BAD 9MM VERT PDW STOCK SYSTEM BLACK
BAD 9MM VERT PDW STOCK SYSTEM BLACK


 
Price: $425.00

Quantity in Stock:(Out of Stock)

Product Code: BAD-100-018-167-9MM
Qty:

Description
 
NOTES:

The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

VERT® buffer system is designed for 5.56/.223 direct gas impingement system.

Will also work on 300BLK DI system as well but must have appropriate gas port size.

Use of NICKEL BORON Coated Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized.



Inside, the rear cavity of the bolt carrier must be .625in diameter x .625in deep minimum to clear the buffer. Damage may occur if proper clearance isn't met.



The BAD-PDW™, BAD-CSS™ and Ultra Compact Pistol SABERTUBE® using the patented VERT® buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition.



However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT® buffer system. Some adjustments or modification may be required.



The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system
Features
  • M16 BCG Compatible No Proprietary Bolt Carrier Group Required! -

    9MM Version Compatible with most 9MM blow-back Bolt Carrier Groups (i.e. QC10, NFA, FAXON, etc.)

    Continuous Cheek Rest for Stable Shooting

    Interchangeable Cheek Rest (different colors/patterns, coming soon)

    Ultra Compact Buffer & Buffer Spring

    Patented, Recoil Reducing, Dual Spring Buffer Design

    Fully Collapsed Length = 4.75in (Not longer 5.5in+/- PDW Style Stocks)

    Fully Extended Length = 8.75in

    (4) Locking Stock Positions

    (2) QD Sling Swivel Points

    High Impact Resistant S7 Tool Steel Guide Rods

    Internal Guide Bushings for Buttery Smooth Operation & Keeps Out Debris

    Intelligent Guide Rod Lock Design

    Fast Stock Deployment

    Continuous Cheek Rest

    Stock Locks Both Directions

    Precision CNC from Aircraft Grade Aluminum & S7 Tool Steel

    MilSpec Type III Class 2 Hard Anodized Black

    (2) Built-In Non-Rotating QD Points

    Lightweight 19.5 Ounces (Complete Stock System with Buffer & Springs)

    Billet 7075T6 Aluminum CNC Machined Butt Stock

    Stock System Weight 19.5oz

    Buffer Weight = 5.56 3.9 oz / 9MM 5.7oz

    Made in the USA

    U.S. Patents #9341437, #9395148, Other Patents Pending

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

AR-15 Parts > AR-15 Parts
AR-15 Parts > AR Buffers/Tubes/Springs
AR-15 Parts > AR ButtStocks
AR-15 Parts
Brands > B.A.D